Korect-A-Bore along with your mandrill is just what
the doctor ordered when you want to change the backset on a cross bore hole from
2 3/8" to 2 3/4" and vice versa. Korect-A-Bore also provides an easy
method for enlarging a cross bore hold when you're replacing a particular manufacturer's
lock with another manufacturer's where a different size cross bore hole diameter
is required. And that's not all! Korect-A-Bore assures of "truing" a
hole properly so that the replacement lock you install will fit perfectly.
Mfgrs. #
List
ESKAB44
28.00
One
Way Screw Remover
Easy to use - works like an ordinary screwdriver.
Exclusive "NO SLIP" tip design provides maximum holding power until
screw is removed. No more drilling, pounding, pulling or chiseling, which wastes
time, bruises knuckles, and causes costly hardware damage.
Mfgrs. #
Description
List
SF800P
5/16, 3/8 & 7/12" f/screws
6-12
95.00
Squeeze
Play
For mortising hollow metal doors Squeeze Play cuts
installation time by 2/3rds - provides a factory quality mortise, a superior installation
and can be used on doors with up to 12 guage. WIth Squeeze Play there are no extra
parts - no cutting - no loss of structural integrity. Squeeze Play may be used
for the installation of 2-1/2 x 1" or 1/8" faceplate, residential or
commerical cylindricial or dead bolt locks in most hollow metal steel doors.
