4 1/2" x 4 1/2"
4 1/2" x 4 1/2"
4 1/2" x 4 1/2"
4 1/2" x 4 1/2"
USP
US3
US10B
US26D
5.00
9.00
8.00
7.00
CAL-ROYAL
- Full Mortise Template Hinge
Ball Bearing - Standard Weight
Steel with steel pin - ANSI A8112
Lock Specialty Discounts
1-2 Units
3-9 Units
10+ Units
List Price
-20%
-40%
Mfgrs. #
Size
Finish
List
BB31
BB31
BB31
BB31
4 1/2" x 4 1/2"
4 1/2" x 4 1/2"
4 1/2" x 4 1/2"
4 1/2" x 4 1/2"
USP
US3
US10B
US26D
8.00
14.00
13.00
12.00
N.R.P (non-removable pin) where not shown, add $1.20 each
N.R.P for US32D add $2.30 each
For sizes and finishes not listed. call 1-800-888-4903
Decorative tips for steel plated hinges:
Ball tip and steel tip - US3 Bright Brass
Call 1-800-888-4903 for price and availability
Call for quantity discounts
Residential, solid brass hinges, half mortise, half surface, swing clear,
extra heavy duty, concealed ball bearing, wide throw and electrified hinges are
available - special ware house order
Call 1-800-888-4903 for price and availability
Call for quanity discounts
CAL-ROYAL
- Full Mortise Template Hinge
Spring Hinges- Standard Weight
Single Acting
Steel ANSI K81071F
Lock Specialty Discounts
1-2 Units
3-9 Units
10+ Units
List Price
-20%
-40%
Mfgrs. #
Size
Finish
List
SH140
SH140
SH140
4 1/2" x 4 1/2"
4 1/2" x 4 1/2"
4 1/2" x 4 1/2"
USP
US3
US26D
10.00
15.00
13.00
For sizes and finishes not listed:
Call 1-800-888-4903 for price and availability
Call for quantity discounts
Maximum
Door Sizes & Weights
Size
Max Door Weight (Lbs)
*Spring Hinges
**Butt Hinges
3 1/2" (Full Mortise)
50
70
90
2 Ea.
2 Ea.
3 Ea.
1 Ea.
1 Ea.
---
4" (Full Mortise)
60
85
110
2 Ea.
2 Ea.
3 Ea.
1 Ea.
1 Ea.
---
4 1/2" (Full Mortise)
70
115
150
2 Ea.
2 Ea.
3 Ea.
1 Ea.
1 Ea.
---
*Note: Wind conditions, excessive air pressure on one side of
the opening or other adverse job conditions may require the use of all spring
hinges. For maximum versatility use all spring hinges. U/L listed spring hinges
are not available with reverse springs.
** Labeled doors require ball bearing hinges
Markar
Reinforcing Pivots
Left Hand Shown
The Markar B1923 full surface reinforcing pivot
adds support to the top of the door where most stress is concentrated with conventional
butt hinge systems.
Easy to install and comes with all necessary fasteners
Acceptable for use on fire doors
3/4" to centerline of 4 1/2 hinge pin
Uses large pin and bushing
Zinc plated 6 Guage(.188") 3/16"
cadium plated steel
Left or right hand models
Mfgrs. #
1-2 Units
3-9 Units
10+ Units
B1923-2C
- Left Hand
B1923-2C - Right Hand
$68.00
$60.00
$54.00
*specify hand when ordering
Markar
Pin & Barrel Continuous Hinges
FM-100 EDGE MOUNT
For all 1 34" doors up to 600 lbs. Used in lieu of pivots or butt hinges
distributing the weight of the door down the entire length of the hinge.
FS-101 FULL SURFACE
1/8" Inset. For all 1 3/4" doors up to 600 lbs. Used to solve door sag
problems by aligning retrofit doors to their existing frames with no need to readjust
weather stripping.
FS-102 FULL SURFACE
Flush Mount. For all 1 34" doors up to 600 lbs. Used to solve door sag problems
aligning retrofit doors to their existing frames.
Supports weights up to 600 lbs. 4'0" Maximum width
Material to be extruded aluminum 6063 - T6 alloy
.25 diameter 304 stainless pin must be Teflon coated
Each knuckle 2", including split nylon bearing at each separation for
a quie, smooth and self-lubricating operations
Finish: anodized finish (anodized, clear, black, dark bronze, light bronze).
Other finishes upon request.
Hinge pin cap
Non-handed
All hinges shall be furnished with manufactuer's recommended hardware pack
per specific model application
Exterior barrel diamter .515 (1/2 inch)
Material thickness less than .125 inches
Material weight will be no less that 1.5 lbs per foot
Hinges shall meet 1,500,000 cycle test (ASTM 156.1)
